Axe stool V
After completing the initial version of the stool, I found myself dissatisfied with the final outcome, recognizing numerous details that could be refined further. Driven by this realization, I set out to design a second, improved version of the stool.
In assessing the existing stool, I identified several key issues and devised plans for their resolution. Firstly, the contact area between the stool’s shoulders, referred to as the axe heads, and the seat was found to be both small and shallow, leading to uneven stress distribution. Secondly, the choice of pinewood for the seat, due to its softness and lightweight nature, necessitated careful handling.
Addressing the first issue, I re-envisioned the design of the stool’s shoulder parts with the intention of metal casting them later on. By extending their length and increasing the contact area with the seat, I aimed to achieve a more balanced distribution of stress when the stool is in use. I developed two designs for this purpose: the first drew inspiration from the I-beam, reflecting a desire to imbue the piece with an industrial aesthetic. However, this version proved suboptimal, as its thickness posed difficulties for attaching it to the seat. The second design, featuring a narrowed tip and hollowed structure, promised a lighter solution without sacrificing strength. The practicality and performance of this revised design remain to be tested through a 3D-printed model. For the second problem, I explored alternative materials online and opted for birch plywood for its enhanced durability and strength.
Sketch of the shoulder
3D model of the shoulder
3D model of the shoulder
